Border Crossings: France - Spain: Difference between revisions

From EGTRE
Jump to navigationJump to search
Line 19: Line 19:


==Hendaye SNCF - Irun RENFE==
==Hendaye SNCF - Irun RENFE==
[E*] {see note above}
[E*] Although lines of both gauges (1435 mm and 1668 mm) cross the border, passenger carrying trains normally run only from France to Irun, whilst those from Spain normally run only to Hendaye, i.e. trains run empty in the opposite directions. Most freight trains change bogies at Hendaye. RENFE 3000 V dc trains operate at reduced power under 1500 V dc catenary in the border areas.


== See also ==
== See also ==

Revision as of 20:40, 31 May 2016

Note: although lines of both gauges (1435 mm and 1668 mm) cross the borders at Cerbère/Port-Bou and Hendaye/Irún, passenger carrying trains normally run only from France to Irún and Port-Bou, while those from Spain normally run only to Hendaye and Cerbère, i.e. trains run empty in the contrary directions. There are some through trains on each route which have their wheel spacing adjusted by the gauge changers at Irún and Port-Bou. Most freight trains undergo bogie changing at Hendaye or Cerbère. RENFE 3000 V dc trains operate at reduced power under 1500 V dc catenary in the border areas.

Cerbère SNCF - Port-Bou RENFE

[E*] Although lines of both gauges (1435 mm and 1668 mm) cross the border, passenger carrying trains normally run only from France to Port-Bou, whilst those from Spain normally run only to Cerbère, i.e. trains run empty in the opposite directions. Most freight trains change bogies at Cerbère. RENFE 3000 V dc trains operate at reduced power under 1500 V dc catenary in the border areas.

Perpignan SNCF - Figueres Vilafant RENFE

[E] This is part of a high speed line, built to standard gauge and electrified at 25KV 50Hz, linking Barcelona with the French LGV network.

Standard gauge freight trains are able to reach Barcelona by use of the high speed line between as far as Mollet del Vallès and thence a dual-gauge line into the industrial and port area to the west of Barcelona. RENFE operates freight at least as far north as Perpignan St Charles.

La Tour de Carol-Enveitg SNCF - Puigcerdà RENFE

[E*] Lines of both 1668 mm and 1435 mm gauge cross the border. The 1435 mm gauge track is unusable and probably originated from the principle of reciprocity, carrying little or no traffic during its lifetime.

(Oloron -) Forges-d'Abel SNCF - Canfranc RENFE

[ED] Line closed. The break of gauge was at Canfranc.

Hendaia ET/FV- Irun Paseo de Colon ET/FV

[E] Metre-gauge railway operated by Eusko Trenbideak/Ferrocarriles Vascos.

Hendaye SNCF - Irun RENFE

[E*] Although lines of both gauges (1435 mm and 1668 mm) cross the border, passenger carrying trains normally run only from France to Irun, whilst those from Spain normally run only to Hendaye, i.e. trains run empty in the opposite directions. Most freight trains change bogies at Hendaye. RENFE 3000 V dc trains operate at reduced power under 1500 V dc catenary in the border areas.

See also